Biqu Bx Side Blower Fan Mount
Description
Designed for printing benchy for the #speedboatrace challenge, could also be used for printing parts with similar dimentsion to benchy. Slides right into the 2020 extrusion, also has screw holes to tighten it up but is probably unnecessary, Its a pretty tight fit into the extrusion slot. Tighten up the lower screw to fix the fan at a specific angle. losen the lower screw and tighten the upper screw to have the fan always (roughly) aiming at the nozzle height. Requires 4 M8 bolts as countere weigt to the fan.
Statistics
Likes
0
Downloads
0