Anker Power Core Speed 10000 Case
Description
I designed this case to hold Anker Powerbank and be able to hang it from a metal frame fence. I uploaded 3 versions of it: the one you can see on pictures, one without the hook and one without the bridge on the top. The bridge on the top is designed to be able to print the latch perfectly horizontal. This alows the batery to get stuck in there and not to scape the mecanism. Then you can remove it with a razor blade. On the files you can also find the f3d archive so you can open it in Fusion 360 and edit it as you want. Just in case, the measures of the powerbank are exactly 62.5 x 99.8 x 22 mm and the case is suposed to be printed with 0 horizontal expansion. Also, you will have to add support blockers on the base and in the inner side of the hooks. This way the supports will go from the bed only to the tips of the hooks. I leave a picture about this. Leave a comment :)
Statistics
Likes
8
Downloads
0