8mm bar end mirror adapter
Description
Adapter For An 8Mm Bar End. This Was Designed For A Driven D-Axis Bar End Mirror. Fitted For A 2015 Kawasaki Z1000 But May Work On Other Make/Models. You Will Need 4 Washers And 2 Shaft Collars For The Mirror To Clamp Onto, These Are Easily Found At Your Local Hardware Store. Remove Set Screw From Shaft Collar. Shaft Collars Can Be Found Here: Http://Www.Mcmaster.Com/#9946K14/=W3Yk38 Od=7/8 Shaft=7/16 Width=7/16 Washers Are Here: Http://Www.Mcmaster.Com/#Standard-Washers/=W3Ykyk Screw Size=M8 Od=16Mm Id=8.4Mm Bottom Piece Needs Supports, Top Does Not. Printed At 2Mm In Abs. Update: Replace Model For Bottom Piece. Original Had Error That Made It Too Thick Causing Stock Bolt To Be Short.
Statistics
Likes
39
Downloads
0