Center Finder for Edges - Inclusive
Description
Like all of her work, the center-finder by korotyshka is a great design and something that comes is very handy. However, I didn't have M5 bolts or any bearings. So admittedly, this is a simplified version of that center-finder... There are no bearings to let you drill right through it, it uses a pencil to mark the spot, and then you have to line up your drill with said spot and nail it on the first try. I've added the pins that take the place of the 5mm bolts; they just push through and should stay in place nicely though you can always add a drop of glue. I also kept the original 60mm distance OC from her design which I think is enough for most applications where it really matters that you hit the center. Print it all at once with the "set" file, or print them separately in different colors. I printed the finder at 40 infill as suggested in the original, and the pins at 55 with 3 perimeters (make sure to print the pins laying down).
Statistics
Likes
90
Downloads
0