BTT piTFT50 V1.0 Adapter Plate for AIO Electronics Enclosure
Description
Made this for my Ender 3 Pro external AIO electronics case. I am building an AIO electronics case from https://www.thingiverse.com/thing:4405355. This AIO case did not have a way to mount the BIGTREETECH piTFT50 V1.0 display to the AIO case. I want to run Klipper Firmware on my modified Ender 3 Pro and Klipper supports the BTT piTFT50 v1.0 display. So to accomplish my task I used parts from other Thingiverse projects and did a small remix of the "LCD_Panel.stl" file from the AIO case (https://www.thingiverse.com/thing:4405355). I used the following parts from https://www.thingiverse.com/thing:4689019: 1. BTT-PITFT50_Case_-_Front_Screen_Cover.stl 2. BTT-PITFT50_Case_-_Rear_Screen_Cover.stl I remix "LCD_Panel.stl" file from https://www.thingiverse.com/thing:4405355 and created a model called "LCD_panel_mount_for_BTT_PITFT50v1.step" from which the following .stl file was created: 1. LCD_panel_mount_for_BTT_PITFT50v1.stl I saved the remix "LCD_panel_mount_for_BTT_PITFT50v1" to the following model file: 1. LCD_panel_mount_for_BTT_PITFT50v1.step Place the BTT piTFT50 v1.0 screen inside of "BTT-PITFT50_Case_-_Front_Screen_Cover.stl". Now, place "BTT-PITFT50_Case_-_Rear_Screen_Cover.stl" on top of the backside of the BTT piTFT50 v1.0 screen. Use 8 - M3x8mm screws to put the Screen frame together. Use 4 - M2.5x10 screws with 4 fender washers and to attach screen with frame to the "LCD_panel_mount_for_BTT_PITFT50v1.stl" part which replaces the "LCD_Panel.stl" part from the AIO case (https://www.thingiverse.com/thing:4405355). I added the "LCD_panel_mount_for_BTT_PITFT50v1.step" file to the AIO case model and called the whole model "Ender AIO Final_Original_with_BTTpiTFT50v1 v1". I have saved this model in two file formats: 1. Ender AIO Final_Original_with_BTTpiTFT50v1 v1.f3z 2. Ender AIO Final_Original_with_BTTpiTFT50v1 v1.step If you want to see the BIGTREETECH PITFTV2.0 remix for this AiO case, please see https://www.thingiverse.com/thing:4948847. If you want to see my Hotend setup for my modified Ender 3 Pro see https://www.thingiverse.com/thing:4941029
Statistics
Likes
2
Downloads
0