Flywoo Explorer LR Insta360 Go 2 Vibration Dampener
Description
The Insta360 Go 2 mount for the Flywoo Explorer LR from xTra97 showed strong vibration in the flight footage. I made the following changes from the original design: - the size of the original stl was 10 times to large - the ring around the camera was too loose, I reduced the height to 95% to tighten the ring - added two dampening rings in between the camera mount and drone connection The dampening worked very well! All vibration is gone! To print this, print it on the side (left or right) to have complete filament rings around the camera.
Statistics
Likes
3
Downloads
0