Magnetic Multipurpose Screw / Parts Organiser
Description
This is a compact screw organiser designed to stop you loosing small screws while disassembling or assembling stuff. - Uses readily available hardware. - Contains larger compartments useful for holding larger components. - Provides adequate sized compartments while being compact. Example use cases.. - Mobile phone or laptop Repair - Building PCBs - Quad copter repairs / Building / Disassembling - Rc Cars, Boats or Planes - 3D Printer upgrades or Maintenance Optional Parts Should you want the compartments to become magnetic the print is designed to work with circular 10mm diameter neodymium magnets with either a 2mm or 3mm thickness. The holes are designed to be a tight fit on purpose in order for the magnets not to fall out. I would recommend for extra security a drop of superglue in each hole before installing the magnets. Magnets I used : https://www.ebay.co.uk/itm/351416155240?hash=item51d208fc68:g:wtIAAOSw44BYff-9&var=620505753360 You may also wish to install a grip surface to the bottom to stop the tray sliding about use the dimensions provided to determine how much is needed. Alternatively stick on rubber feet would work as-well. Printing Tips If your planning on printing this I recommend printing with a 20% infill and the part cooling fan set to 100% for overhangs. For the best results and surface finish I recommend orientating the part as shown in the image.
Statistics
Likes
9
Downloads
0