TBS Source One v4 BN880 GPS Front Mount
Description
Front BN-880 GPS mount, for TBS Source One v4. The mount sits 10mm back from the leading edge of the frame, ensuring that the camera is not covered, and the camera angle is not limited. Was printed in PETG, as I did not want the gps vibrating, should print fine in any other material. Below the gps is a 1/16 foam double sided sticky pad, to give some amount of cushion. Wires pass threw one of the pre-cut holes, just forward of the second set stand off screws.
Statistics
Likes
0
Downloads
0