Lack post mount for the RMU
Description
I needed to mount the RMU, Retraction Management Unit, from the Wedge Group, UK, on the outside of my Lack enclosure, I've reduced my Lack enclosure size I just simply have little space in my work area. To accomplish this task I needed to remix the RMU bottom body so that I could make it fit a custom bracket of my making that attaches to the rear post of the Lack enclosure. The bracket has a hole in it to screw it into the Lack posts, but it compresses well enough to preclude its use. The brackets require two m3 screws to pull the parts together. I've just finished the installation of the RMU and have run a small 3 color print, 4 hours without any problems. I bought four heated dry boxes that sit on the enclosure that feed correctly into the RMU. Again due to my limited space I had to opt for a reasonable solution that has a small footprint.
Statistics
Likes
3
Downloads
0