Filament Spool Holder (Tevo Tarantula)
Description
<strong>My first 3D project on my first 3D printer :).</strong> Designed to hold a 1KG spool (possibly larger) on top of the Tevo Tarantula printer. The roller has holes for 608ZZ bearings on both sides, the screws have a latch that goes into the bearing with a slight force and sticks there and the stand has holes for two M5x12 screws to bolt it to the frame. Everything holds steady and does not affect the quality of prints in my case. <h2><strong>Additional parts needed:</strong></h2> 2 x M5x12 screw 2 x M5 t-nut 2 x 608ZZ bearing <h2><strong>My settings for printing of individual parts:</strong></h2> Stand - 15% - adaptive layer height - 2 Shells Roller - 20% - 0.25mm ; 0.00-5.00 and 105.00-110.00 - 0.10mm - 2 Shells Screw - 25% - 0.10mm - 3 Shells If you make this project share it in the comments or "Post a make". I will be happy if it works for you :). You can also "buy me a few grams of filament" through a tip ;). <a href="https://bit.ly/3nUEKOZ">  </a>
Statistics
Likes
2
Downloads
0