Blink Mini Mount for Printer Enclosure
Description
I wanted a decent quality camera in my printer enclosure that I could monitor whilst I was away. I had a spare Amazon Blink Mini kicking around so I decided to use it. Having balanced the camera on a Pringles can I wanted something that would attach to the upright tube of the enclosure itself. The enclosure tubes are 16mm in diameter so it's designed for that but feel free to edit as you need to. I used ABS as it gets hot in the enclosure, I'm sure PLA would work but I'd double check that first if I was you. The clamp part has a 3mm hole through it for tighten up. I would recommend an M3 by 30mm bolt. Screw the camera down to the disk with a couple of small screws and the jobs a good'un.
Statistics
Likes
4
Downloads
0