Mix and Match Dildos
Description
Mix and Match Dildos - Common Shaft Diameter: 40mm (1.57") _ - Wolf Major Diameter: 58 mm (2.28") - Wolf Usable Length: 187 mm (7.36") - Wolf Area: 321 ml (10.85 oz) _ - Horse Major Diameter: 48 mm (1.89") - Horse Usable Length: 197 mm (7.76") - Horse Area: 253 ml (8.55 oz) _ - Dragon Major Diameter: 45 mm (1.77") - Dragon Usable length: 179mm (7.04") - Dragon Area: 274 ml (9.27 oz) _ - Cetacean Major Diameter: 47 mm (1.85") - Cetacean Usable Diameter: 201 mm (7.91") - Cetacean Area: 270 ml (9.13 oz) _ - all molds and "parts" use the same starting and ending diameter so they are all interchangeable - 9.7mm dowels used for each half assembly - all cubes are 101.6 mm (4") or less to be printed on the smallest printers - all base options have suction cups - I would personally glue the individual sections together to form the two mold halfs -- A good silicone choice "Smooth-on dragon skin 10 Slow" ___________________________________________________________________ - https://www.billieruben.info/post/3d-printing-sex-toys-a-quick-easy-and-safe-method - Print with thick walls ex: 4 layers or more - if going the wax route don't let the molten wax sit in the mold too long, it softens the plastic - the mold is one time use flashing free, it can be opened (if the wax process doesn't go 100% as planned) and reused but you will have flashing on the toy to remove. - you can also just print the dick it self, sand it smooth, seal and make a mold the old fashion way, use this way for the best results. - I recommend printing vertical if possible to get the resolution. - also need some 5mm dowels to align the top but not 100% needed. - pour the silicone to just bellow the surface then right at the end of the pot life smush the top on using pins (ex skewers) in the alignment hole and a weight to keep it from moving - a good resource for silicone toy making: https://vimeo.com/candiru - if you screw up your first toy just cut it up and use it as filler for the next toy - Have Fun!!
Statistics
Likes
26
Downloads
0