Calmato stand / Support de terrain pour Calmato
Description
This is a stand for a Kyosho Calmato alpha 40 RC plane. It may be adapted for any other plane. You will need to print the following parts : - 4 x pied - 1 x T_avant1 - 1 x T_avant2 - 1 x T_arriere1 - 1 x T_arriere2 - 2 x Support aile2 - 6 x chapeau (or chapeau_crochet if you want a hook on top of the cap. The cap may be used to put some elastic belts to secure the wing) If you prefer to have all the pipes at the same height, you can print 4 x T.stl instead of the T_* files above. You will also need some 32mm diameter PVC pipe parts : - 4 x 57mm for the feet - 2 x 136mm and 2 x 680mm for the frame - 240mm, 200mm, 140mm, 100mm, 280mm, and 60mm for the edges. See the 'Pipe length' image for the details. I used some glue for PVC to assemble all the parts together. Planned improvements : - some retractable feets to improve the stability in the car trunk - a way to add some straps to carry the stand with the plane on the shoulder.
Statistics
Likes
1
Downloads
0