Ring Doorbell Wired (2021) Corner Bracket
Description
This is a bracket for the Ring Video Doorbell Wired 2021 release. The bracket allows for mounting the doorbell in a corner. Inspired by this thing https://www.thingiverse.com/thing:4811453 but my particular case needed some slight adjustments. This thing also has a cutout so that the doorbell can rest flush against the bracket instead of leaving a small gap around the edges. Noteworthy: This design has a distance of 68mm between bracket mounting holes (meaning your mouting screws going into your brick / home siding must be 68mm apart). If this doesn't work for you, you could have a go at changing this distance in the Onshape file: [https://cad.onshape.com/documents/5544f58a9e02818568dd2d5f/w/16442687f4a11d414d9b1093/e/9f26f22fc8da2a5c859440ef ](https://cad.onshape.com/documents/5544f58a9e02818568dd2d5f/w/16442687f4a11d414d9b1093/e/9f26f22fc8da2a5c859440ef) (edit the sketches called "Mounting Holes" 1 and "Mounting Holes 2") I printed mine with PETG and using supports but maybe this isn't required if your printer does a good job with bridges.
Statistics
Likes
4
Downloads
0