Anet A8 PSU Cover
Description
This PSU cover was designed for the Anet A8. It is suited for a 3-pin fused module plug, an essential upgrade for the Anet A8 which comes without a power switch. The cover is mounted on the right-hand side, with a screw directly on the PSU, which has an M3 screw hole, and on the left-hand side, a dome fits into one of the holes on the PSU, keeping the cover in place, with <b>no need for drilling or large printed parts.</b> The two large hex holes in the front have an inner diameter of 11mm and so, they can be used to mount switches or potentiometers for fans, lights, etc. Additionally, the holes throughout allow for <b>great ventilation</b>, which is much needed for the PSU. It is designed for <b>minimum material</b> use and print time. I printed it with 20% infill and a resolution of 0.15mm in under 4 hours with a weight of 30g. I have included the SolidWorks file so that anyone can remix it and edit it.
Statistics
Likes
3
Downloads
0