Geeetech A10T Temp Tower 250C to 175C
Description
Edit - 7 Oct 2021: Added singletons from 175 up to 250, as well as g-code for a 3-color tower, from 250C to 200C... all other details below still apply. Remix of Z3ALT's awesome TTT for a Geeetech A10T and Amazon Basics PETG filament; starting from high temperature and reducing as the stack is printed. Key Notes on attached G-Code: - disabled fan due to needed PETG temps - Hard coded for equal extrusion from all 3 A10T extruders (through 3-in-1-out hotend) - Bed Temp set to 50C - Temp change done manually after slicing, keying off of pre- & post- tool change scripts (no actual tool change occurs) at approx. every 25 layers at a layer height of 0.2mm (per Z3ALT's recommendation) Each TestLayer is 50mm x 20mm x 5mm ; see Z3ALT's original for better details & descriptions. Thanks to Z3ALT for the deisgn. Any questions, feel free to comment.
Statistics
Likes
3
Downloads
0