Laser Holder for Telescope
Description
I designed and 3D printed a pointer holder with a Vixen type base (small) which works well on many telescope. I printed with ASA-Carbon Fiber filament, which is more resistant and rigid. The screw holes are small and need to be drilled out according to the screws you want to use. The drill bit should be 0.5mm in diameter smaller than the screw diameter. For the on/off button of the laser there are two holes, one on the right and one on the left (I used a 5mm allen screw for which I also designed and printed a ring nut). For centering I used 3 mm allen screws (2.5 mm holes). Printing: 0,2 mm Infil 30% walls 1,6 mm Pla or filament with carbon fiber that are most rigid than Abs I printed it with ColorFab Xt CF20 (Asa+carbon fiber) hotend 250°, bed 70°, speed 30mm
Statistics
Likes
1
Downloads
0