iStarUSA D-400 - Triple Fan - 14 HDD Mount - v1.2
Description
Used this design to create something for my iStarUSA D-400 case. (Pictures are from smaller case just to figure out the line up and fitting in the case) Wanted to store more than my 8 drives and get better airflow. Still a work in progress. Using my design Multi-Disk Drive Mount for HDD mount: https://www.thingiverse.com/thing:1972432 One set of each works on each side (far left and far right). Center design is added to this project. (this one had to be slimmed down one hole on each side) The screw holes around the perimeter is estimated based on first print that didn't have screw holes. After drilling out the holes I measured and placed around the exact placements. May need to be updated after printing this updated design. Let me know if you have ideas or questions. Updated to v1.2 - modified sizing and mounting holes. - power / hdd buttons and LED fit perfect -https://www.amazon.com/gp/product/B07JYX97Y6/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Statistics
Likes
2
Downloads
0