TRD Pro Beadlock 1.9 Dia.
Description
Designed to fit The Element Enduro Frontrunner and Knightrunner but may work on other vehicles. ***Important, please read!*** This wheel requires two components to be purchased to work correctly on your 12mm hex vehicle. FT Enduro Beadlock Hex Adapter, Brass - Part #42104 (24) M2.5mm X 20mm Long Socket Head Cap Screws Stainless: McMaster.com part number 91292A019 Black Oxide: McMaster.com part number 91290A108 Will only work with these parts!!!!!!! Printing: Front - Front of wheel face up, infill 20%, Supports and brim if you have adhesion issues Center - Infill 20%, supports and brim necessary as edge is small Back - Disc brake side up for best quality, 20% infill, supports May need to slightly open holes for lugs or thread through screws. Front and Back are slip fit into center ring.
Statistics
Likes
4
Downloads
0