Octoprint control box
Description
THIS IS A WORK IN PROGRESS. I WILL APPRECIATE YOUR CONSTRUCTIVE CRITICISM I wanted to easily control some functions on my CR10s particularly since I put it inside an enclosure. However, all the designs I found on Thingiverse use the 6x6 tactile push buttons. I wanted to use the spare 12x12 buttons I had from another project. So I redesigned the model using the other creations and this is what Ive done so far. The box is in 3 parts for easy access to the buttons when soldering. I used M3 screws and insert nuts to put it all together. Things your need - 2 M3 screws 20mm long - 10 12x12x7.3 mm Tact Tactile Push Button like this ones https://www.amazon.com/gp/product/B01JGNKPL0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - Jumper wires (at least 12 with a female connector) - 51 g (17.22m) of your favorite PLA filament - 3 hours 45 minutes to print - Physical button plugin from LuxuSam https://github.com/LuxuSam/PhysicalButton/tree/master The buttons hopefully will trigger a gcode by the "physical button" plugin in Octoprint.
Statistics
Likes
22
Downloads
0