Nexus Thrust
Description
https://www.youtube.com/watch?v=wneKryEPI9A Print this how you see fit. I've not printed it myself yet, but intend to when i get more filament. There are very few parts in this build, because keeping it simple is the name of the game. I'm still working on this, so take it as is, modify it for your own goals. There are several parts you need to buy, as off-the-shelf parts are easier, and stronger in some cases. Bill of Materials: Non-Printed Parts Mechanical Hardware: 1x Nema 17 Stepper Motor (Size Matters: 36.5mm Tall x 42.5mm Wide x 42.5mm Deep not counting spindle shaft) 1x 300mm TR8*8 (We need to maximize speed, so the more lead the beter) 1x 123mm length of 2040 aluminum extrusion 1x 5mm to 8mm lead screw coupler 4x M5 x 10mm 4x M5 x 12mm 2x M5 x 30mm 10x M3 x 12mm 4x M5 T-Slot Nuts (For 2040 Extrustion) Electrical Components: I'll be adding a link to the board gerber filess at a later date if you want to have them made. If you want to roll your own, there's only 1 place within the print allotted for a PCB, and that just the motor mount, and it's 44mm x 26mm with 3mm holes for screws 3.5mm from each corner. You'll see this spot on the 3MF file for the main body
Statistics
Likes
4
Downloads
0