Safety Glasses Box - Logo with filament change
Description
I combined the logo to one STL file an increased the hight of the white parts to have three extra layers. Thus it is possible to use the filament change (M600) to use a white filament for the last three layers. (Prusa-Slicer: Filament change at 1.2 mm). For the front cover I used the "Dual_No6.stl" and glued both parts together. For more details see the pictures: - I fixed it with a tape to bring the logo in the right position. - I used 2K glue in the gaps between the tape. - I used an upright position to avoid that the glue reaches the front side. Thats it. I used the V2 version (take a look at the picture and the hair) and added V2 with the correct hait :-). I tested only V2.
Statistics
Likes
2
Downloads
0