Golgari Keyrune
Description
9" from the very top of the antennae to the tip of the key. There are files for the complete model as well as the separate pieces (if, like me, your printer doesn't print very big. :P) I hope you all enjoy! Printer Settings: Elegoo Mars: Settings using Translucent Standard Photopolymer Resin (Elegoo) Layer Height 0.04 Bottom Layer Count: 7 Bottom Exposure Time: 75s Bottom Lift Distance: 4mm Lifting Distance: 4mm Bottom Lift Speed: 20mm/min Lifting Speed: 40mm/min Retract Speed: 150 mm/min Infill: None.
Statistics
Likes
0
Downloads
0