ESPixelStick V3 Case
Description
This is a case designed to hold an ESPixelstick V3 Printing: 0.4mm Nozzle, 40% infill Additional parts: 4x Heat Set inserts (M3 Brass Insert 100pcs, 5 mm OD, 5.7 mm Length, Female M3) 2x PG7 Glands 4x M3x7 Socket Head Bolts 1x Silicone 1x Conformal coat spray 5x Ferrule ( Optional ) 1x Outdoor 16 Gauge wire in round sleeve 1x Ray Wu, X-Connect, ETC cable 1x SD Card ( For EsPixelStick ) 100000000x Christmas lights :) Post processing: 1)Clean up any stringing 2) sand down holes for Glands. 3) Install heat set inserts 4) Install Glands 5) Put connectors on glands 6) Connect cabling to EsPixelStick 7) Test pixel stick 7) Screw lid closed 8) Coat container with Conformal coating / ??? 9) Enjoy
Statistics
Likes
0
Downloads
0