The no-strings part cooling fan duct for Sovol SV01 Rev.2
Description
Introducing the no-frills, no-strings duct your SV01 will become an instant fan of :D. Designed with PETG in mind. A sagging-resistant design, it will not bump into your prints. Minimal path air flow that will not cool the nozzle. Rev.2 has a single larger opening that flows tangential to the nozzle tip to improve cooling of the just-extruded material. Also added a second internal support pillar to improve bridging. (9-25-21) Rev.2 Standalone can be used without the stock heat break metal shroud in case you have modded your heatbreak cooling fan and no longer use the stock metal shroud. It will mount directly to the X-carriage using one M3 screw. (10-19-21) Rev.2.1 is simplified internally to print faster and more reliably and has a built-in support for the vent arch. Just Xacto it away from the part when done printing. (10-29-21) It's so simple to print even I could do it, please post makes! :)
Statistics
Likes
3
Downloads
0