gache blocage porte-fenetre sans trous
Description
This is a redesign of LEMANDRAGORE's blocking door system (thing:2941793). This remix does reuse the same "block2.stl" so you can print it directly. It also integrate the small nut system that is used to fix the system in the door. I am using M4x10 screw. There are 2 kind of plastic nut hat have to be inserted in the "ditch" (?) : the vertical and horizontal one (on the underside of the window) are different. you can see the difference on the picture of the 2 arrow. So be careful becasue they can't be exchange.
Statistics
Likes
0
Downloads
0