2Fiddy Immortal T Bottom Mount
Description
Wanted to use a full sized Immortal T on my 2fiddy but found that it was too big for the arms or the front/rear so I designed this mount which secures to the bottom m3 bolts which lock the arms in place. Print Settings: Layer height @ 0.2000 Retraction @ 6.00mm Retraction Speed @ 80mm/s xz Infill @ 40% Supports @ Yes Support Pillar Resolution @ 1.00 Horizontal Offset from Part @ 0.20 Use Raft @ Yes
Statistics
Likes
0
Downloads
0