Criss Cross Dice Tower - Circular Remix
Description
This is a remix of Criss Cross Dice Tower https://www.thingiverse.com/thing:4944004 - Remixed to be circular, - Remixed to be slightly smaller. I have placed both STL files of the NEW Circular Dice Tower and the Original Square Criss-cross Dice-tower, for your convenience. The tower is Designed to roll dices in clockwise spiral down the tower, and give it a good roll in all directions - 3 directional baffles to bounce dice off the side walls, - Final roll in the catch tray. - Suits Any Dice up to Do= 26 mm ( 1 inch ) outer diameter dice size, even your D30’s Printing:- - Designed to be printed upright, - No supports needed - No infill needed - the form is already very rigid. NOTE! Make sure you’ve dialled in your printing profile. There is A LOT of difficult overhangs on this print. 1. *Print with 0.16mm layer height Or LESS,* 2. *Print at SLOW speed about 10mm/s to 15mm/s* 3. Needs 4 or 5 top & bottom layers thickness for corner strength. Also, - Do not scale it down, otherwise the tower won’t work, and some dice will get stuck. it needs sufficient spaces ‘bounce gaps’ to bounce dice off the walls. - Do not reduce the height, otherwise overhangs become too shallow and won’t print well. For printing details of the original square Criss Cross Dice Tower see: https://www.thingiverse.com/thing:4944004 thanks!
Statistics
Likes
15
Downloads
0