WE M712 Stripper Clip Reworked - Automatic Bolt Closing and other Additions
Description
This is a kinda-WIP remix primarily of Declan0811 ´s great WE M712 Striiper Clip (https://www.thingiverse.com/thing:4958907) and also marks the first thing I ever published. Taking his version as inspiration, I have modeled this from the ground up to have a bit better dimensions and to enable additional features, primarily an automatic closing of the bolt when the stripper clip is removed, since thats how the real one functions. Like his version, this is intended to load the short mags (10 BBs) from the top without having to remove the magazine. Additionally, one experimental version is included: The "Parabellum" version, where the pushing piece is designed to look like a bullet, purely for aesthetical purposes. The Bullet was remixed from the_black_bunny ´s 9mm Luger Dummy (https://www.thingiverse.com/thing:4747929) (Yes, I know the C96 uses 7.63x25 Mauser, but with my personal model I am emulating the "Red 9", so I used that cartridge as a basis) Print orientation is shown in pictures. For the housing you could print it standing upright, but this can lead to easier snapping of the rear guide, Or you can print it laying on its side, but then supports inside of the BB channel are harder to remove. To circumvent this, block the supports inside the BB channel from being generated. !Update: the experimental versions with loading gate have been removed, since it is just as easy to fill up the stripper clip without removing the pusher by just pushing the BBs into the channel from the bottom opening, making the feature unnecassary! !Attention: the "normal" and "parabellum" versions are not entirely interchangeable! !When first assembling, the rear guide has to be pulled back slightly to insert the pusher and can therefore tend to break, especially when printed standing upright. Please handle with care! When actually using this to reload, I´d advise to hold the gun in your left hand, gripping it by the mag base, then seat the clip properly before pressing down the pushing piece firmly with your right hand. Don´t get discouraged by the BBs resistance.
Statistics
Likes
3
Downloads
0