CR10S pro 40mm mainboard fan adapter
Description
so, my mainboard fan broke, and I didn't have a spare, so I made this shroud real fast so I could get it up going again. It uses a 40mm fan. parts needed: - 4pcs M3x20mm screws - 2/4pcs M4x6-12mm screws for fan - 40mm fan (I use a 40x10mm fan, but a 40x20mm may fit) another thing I did was to turn the mainboard around so that I could have all wires for the octopi internally, which you cant do with the original fan because all the air will stop on the 8-pin connector. So that's another good thing about this shroud. Hope it is helpful. :)
Statistics
Likes
1
Downloads
0