Absaug Dingens - Suction Thing
Description
This is my "suction thingy" for the drill press. The suction of the chips from the Forstner bit works great. There are 5 versions included with different inner diameters of the suction connection. (32, 35, 38, 40 & 42mm) Here is the video about it: https://youtu.be/hugGShBDvfQ TimeLapse Print: https://vm.tiktok.com/ZM8e5hGoC/ My YouTube Channel: https://www.youtube.com/thosa I printed on double sided carpet tape for better adhesion. After printing, heat up the bed to 60°C for easier removal. print speed: 50mm/s layer height: 0.2 20% infill support needed! Dies ist mein "Absaug Dingens" für die Standbohrmaschine. Die Absaugung der Späne vom Forstnerbohrer funktioniert prima. Es sind 5 Versionen enthalten mit verschiedenen Innendurchmesser des Absauganschlusses. (32, 35, 38, 40 & 42mm) Hier ist das Video dazu: https://youtu.be/hugGShBDvfQ TimeLapse Druck: https://vm.tiktok.com/ZM8e5hGoC/ Mein YouTube Kanal: https://www.youtube.com/thosa Ich habe auf doppelseitiges Teppichklebeband gedruckt, damit es besser haftet. Nach dem Druck das Druckbett auf 60°C erwärmen, um das Ablösen zu erleichtern. Druckgeschwindigkeit: 50mm/s Schichthöhe: 0,2 20% Füllung Unterstützung erforderlich!
Statistics
Likes
13
Downloads
0