GAL 12v-40 L-Boxx Mini
Description
Custom casing for Bosch GAL 12v-40 and 3 GBA 12V 3.0Ah battery packs which fits in a L-Boxx Mini 'like-a-glove'. Quick Guide: - print the parts - press-fit battery insert into GAL_CaseTop - glue GAL_BeeAwesomeLogo to GAL_CaseTop - glue together the GBA_* parts - disassemble original GAL 12v-40 - assemble printed GAL case - transfer top label from original to printed case - insert new case into L-Boxx Mini GAL 12v-40: The casing for the charger uses the original screws, therefore no additional material ist required. 6mm transparent/translucent plastic rods may be inserted into the LED holes. GBA 12v 3Ah: The casing for the battery packs consists of three parts which must be glued together after printing. L-Boxx Mini: No modifications required. Printing: It's been a while since I've printed this for myself, so I don't remember the print settings. What I do remember - the printer should be very accurate, there are more or less no tolerances to fit this in a L-Boxx Mini. During design I fought for every 0.5 millimeter.
Statistics
Likes
15
Downloads
0