Quest 2 Ikea Skådis Skadis pegboard mount
Description
Wanted a solid pegboard mount for my Quest 2, so i remixed AlexKapa94 and mobiusl models to fit the Ikea Skådis holes. My first prototype was with the pegboard fasteners, but due to the mount detaching during use, being generally wobbly and not trusting that the fasteners could hold Q2 with DAS and powerbank, I settled with M5 bolts and nuts. The wall mount with bolts is rock stable. Ideally you'll need three M5x15mm bolts to fasten the mount. You can use up to M5x30mm, however the bolts will then be flushed to wall, as shown in the pictures. # PrusaSlicer Users There is some wierd artifacts on the outer shell near the top of the model when you use PrusaSlicer with default settings. I needed to lower `external perimeters` from `0.45` to `0.30` for slicing the upper parts of the arms correctly on my Prusa Mini+. You want to avoid the preview to looking like this:  # Updates ## Controllers 2021-09-19 v1.0.0: Remixed mobiusl's model to fit skådis ## Headset 2021-09-19 v1.0.2: AlexKapa94 adjusted the cutout in the source model, updated the remix. 2021-09-15 v1.0.1: The USB-C cutout was a bit off when headset was angled, so i removed 3mm ish. Also added a comment over at AlexKapa94 thing for him to change upstream.
Statistics
Likes
2
Downloads
0