Anchor locker hinge for Beneteau First 26 (sailboat)
Description
Replica of originally fitted anchor locker hinges on Beneteau First 26 sailboats (1980s). Smaller piece is through bolted in the V-berth, the longer latch into the anchor locker. Printing: Temp: 240C Bed Temp: 70C Filament type: PETG (or ASA) Fits M5 machine screws or 3/16" (10-32). Use 5mm stainless steel rod/pin to connect the two parts of the hinge Use 5mm drill to prepare or enlarge holes upon print. Sand the connecting pieces if needed.
Statistics
Likes
33
Downloads
0