Thermacell_Filler_v1
Description
this is the updated model of the Thermacell butane adapter. it utilizes the gasket on the thermacell nozzle to prevent gas from leaking out during refill. it fits the nozzle snugly so there is no need for modification unless you see fit. print in an upright verticle position with the nozzle facing upwards. for best results, I used a .02 nozzle with .1 layer height. I used 25% so it doesn't break as I'm applying pressure while filling. use a raft to get proper bed adhesion. I used inland pla+ for the original design and it came out fine. best of luck and happy filling
Statistics
Likes
4
Downloads
0