Traveller Imperial Warbot
Description
This is a kit for a 28mm scaled Imperial warbot for the Traveller roleplaying game. These parts are sized for resin printing. Print everything flat on the plate. Only the arms require supports. These files are a remix of Robert Pearce's original design published here on Thingiverse with his permission. You can catch up with Rob on his blog 'Yet Another Taveller Blog': http://travellerrpgblog.blogspot.com/ Thanks again to Rob for giving me permission to modify and publish his design. It was a fiddly job but I'm pleased with the result. You should check out his Geomorphs, they're incredible! This kit will need gluing together. Print one of each part: - warbot arm left OR warbot arm left supported - warbot arm right OR warbot arm right supported - warbot body lower - warbot body upper - warbot head - warbot pin - warbot base Or you can simply drop the following STL onto your plate: - warbot all files Skip the base if you're going to use your own. The hole in the base of the warbot is 3.5mm in diameter. Finally, scale... I think it looks about right for 28mm heroic scaled figures. But you might want to print it a little smaller to fit your minis if they're non-heroic (try 90%) or even smaller to sit alongside 15mm minis. I printed this warbot on a first generation Elegoo Mars with a flexible magnetic plate using grey AnyCubic resin. I would strongly advise you enable bottom tolerance compensation in Chitubox (see the image) which should allow you to blade-off your printed parts, even if you don't have a flex plate. Enjoy!
Statistics
Likes
7
Downloads
0