DIY Keybiner
Description
I Was Really Excited After Coming Across The Keybiner Kickstarter (Link: Https://Www.Kickstarter.Com/Projects/Fortiusarms/Keybiner-The-Carabiner-Refined) And I Did A Backing That Would Get Me An Aluminum Keybiner. I Couldn'T Wait Until The Couple Of Months Estimated For The Delivery To Try The Idea Out-- So I Made My Own Version That You Can 3D Print Or Laser Cut. This Design Isn'T Perfect By Any Means-- The Printed Clip Doesn'T Have Very Much Tension, And I Didn'T Spend Much Time Designing A Useful Hole Pattern In The Middle The Way The Real Keybiner Has (Although The Largest Hex Shaped Hole Is Sized For Screwdriver Hex Bits). If I Have More Free Time For This (Ha!) The Next Revision Would Probably Have An Integrated Clip Like The One Shown Here: Http://Www.Thingiverse.Com/Thing:169192 I Used 4-40 Screws With Nylock Nuts To Hold It Together, 1/2" Is Just Barely Too Short For 2 Keys Depending On The Thickness So I Would Try Using A 5/8" Length Screw. I'Ve Included An Stl For The Spacer I Used, Although It Hasn'T Been Tested Because I Just Used A Nylon Spacer That I Had. The .Stl Has The Same Dimensions As The Spacer I Used And Works Well For Having Two Keys.
Statistics
Likes
177
Downloads
0