Adafruit LED Matrix Portal Frame
Description
This is a frame for Adafruit 64x32 RBG LED Matrix (3mm pitch) with an optional Adafruit Matrix Portal M4 cover. The depth of the frame can accommodate the LED matrix with or without a diffusion panel. Outer Dimensions: 20 cm x 10 cm x 3.2 cm Inner Dimensions: 19.7 cm x 9.6 cm x 3 cm Print 2 of the frame pieces, then secure to each other using a small dab of super glue on the two tabs. If needed, the board cover fits securely into the cutout on the side of the frame; no glue needed. If desired, gently secure the matrix portal into the frame with some hot glue on the back.
Statistics
Likes
2
Downloads
0