Wenax C1 USB-C Dock
Description
A USB-C dock for the Wenax C1 vaporiser since I was tired of it laying on its side while charging. The design as-is works quite well, but it's a very tight fit - I had to use a small rubber mallet to get it all the way in. On the plus side, no screws needed! I'm going to add a bit more clearance, and fix some minor sizing issues that don't affect fit. Printed on a Mars 2 Pro resin printer, so I'm not 100% sure how it will fair on a filament printer. Designed to work with a cable I have on hand (from Anker) but in theory it should work with various cables. Also works with an Aukey cable I had on hand with a bit of trimming of the plastic housing. For reference the dimensions of the cable I have: Cable itself: 3.1mm diameter Male USB-C Housing length: 5.5mm Male USB-C Housing width: 11.5mm Male USB-C Housing height: 14.5mm Changelog: V3 - Added 2mm of interior clearance where vaporiser sits as it was too tight V2 - Added 0.127mm of interior clearance for cable housing component as it was too tight
Statistics
Likes
1
Downloads
0