3Δ Printer Control
Description
# 3Δ Printer Control Https://Github.Com/Minad/3Delta 3Δ Is A Host Software For 3D Printers Of The Delta Style. In Many Aspects It Is Similar To Pronterface. However It Brings Additional Motion Control Better Suited To Non-Cartesian Delta Printers. List Of Features: * Gcode Console * Connection Via Serial Port Or Telnet * Plots For Temperature, Temperature Deviation And Heater Pwm * Relative And Absolute Motion Control Especially Suited For Delta Printers * Calibration Assistance For Delta Printers * Gcode Lookup Taken From Http://Smoothieware.Org/Supported-G-Codes * Sd Card Upload And Play * Send: Direct Playing Of Gcode Files ## Installation Just Download The File [3Delta](Https://Raw.Githubusercontent.Com/Minad/3Delta/Master/3Delta) And Make It Executable. Besides That You Need The Following Packages Which Are Available Under The Usual Linux Distributions Apt-Get Install Tcl8.5 Tk8.5 Tcllib Tklib Then Start It With $ ./3Delta 192.168.1.X $ ./3Delta /Dev/Ttyacm0 To Access Your Printer Either Via Telnet Or Via A Serial Port. ## Disclaimer This Is Very New Software! I Am Using It, But I Cannot Guarantee That It Works For You. But I Am Happy To Help If It Doesn'T :) I Am Currently Using Smoothieware As Firmware. Some Features Might Not Work With Other Firmwares Since The Output Format Sometimes Differs. I Would Appreciate Patches Which Make This Work With Other Firmwares. In Principle 3Delta Should Work Also Under Mac And Windows When The Current Tcl/Tk Packages Are Installed. However I Didn'T Test It.
Statistics
Likes
37
Downloads
0