HERE 3 GPS 10mm Mast
Description
Here 3 GPS Mount for a 10mm mast. If your 10mm hole is undersized/oversized when printed you will need to adjust your 'Hole Horizon Expansion' setting in CURA. That is a problem with your printer settings, not this STL file. If printed with a properly calibrated printer this mount will NOT move or wiggle once you tighten the HERE 3 GPS screw.. Use these mounts at your OWN RISK!!!!. It is not guaranteed against bird attacks etc...etc I recommend 100% infill to prevent breaking/weakening the 2 clips/claws
Statistics
Likes
1
Downloads
0