My coronavirus Covid-19 Face Mask MK2

My coronavirus Covid-19 Face Mask MK2

Description

my vacuum formed facemask MK2 -------------------------------------------------------------------------------- This is my 2nd mask published here, and I do feel that it is much improved over the first. The aim of this project was to make my own 'Covid-19' mask, and the process had to be fast and cheap on materials. 3d printing a mould and 'vacuum forming the mask seemed to be the best solution. I now make a basic mask in about 5 minutes. I use two (3mm activated carbon filters) with cotton wool sandwiched between them.(the thickness of the cotton wool dictates how easy or hard it is to draw breath through the filters). They are my personal choice. Other filters can be used if preferred. The moulds require no supports or rafts, and can be printed at standard resolution with just 20% infill. I have a webpage that explains more information & has links to the various componants: https://www.freecovidfacemask.com/ The is a youtube video here that follows the whole project from start to finish. https://youtu.be/18u-2myHeoU ------------------------------------ This 3D model has not been approved by any regulatory agency and has not passed any laboratory tests. It was designed by me for my own personal use. It is not intended to replace any homologated mask, but to provide minimal protection. Note: I am not a doctor and cannot give any assurance that this will work. Use it at your own risk. ------------------------- If you like this mask and would like to help support my work you can either use the "Tip Designer" link or PayPal me directly at: https://www.paypal.me/cooperroy Please hit the like button! (if you like the product)

Statistics

Likes

1

Downloads

0

Category

3D Printing