Brain Teaser
Description
Description: This is the "Through the hoop" brain teaser! I played it in a shop and decided to design it instead of buying it. The ultimate goal is to get the string and ball off of the base and hoops completely (it's possible!). I used an actual 1/4" wood dowel (5.25", 4.25", 3.25", 2.25", 1.25") for the poles but went ahead and designed 1/4" poles for those who don't have access to wooden dowels. You will also need approximately 12" of string (I used yarn but any thin string will work). Printing: You will need to print 1 base, 5 poles (if not using wooden dowels), 2 different size balls, and 4 hoops Infill: 40% for the base, both balls, and hoops Infill: 80-100% for poles Nozzle temp: 220 C Bed temp: 60 C Print speed: 50 mm/s Initial layer speed: 20 mm/s Number of slow layers: 2 Support: Only for the two balls and poles Let me know if you are able to beat it!
Statistics
Likes
0
Downloads
0