11 x Jetson Nano rack mount
Description
A bracket to mount the Jetson Nano Dev kit in a standard 19-inch server rack. This will fit 11 Jetson Nanos in a 2.1U space for a very simple and tidy cluster solution. This is based heavily on: Raspberry Pi 4 2U rack-mount bracket / Rackmount https://www.thingiverse.com/thing:4078710 Here are all of the parts you will need for a complete 11-Jetson cluster: To print: 11 frame parts, optionally without notches on one 11 tray parts 2 ear parts, optionally rotated by 90 degrees for top loading 4 threaded rods cut to 17 5/8 inches. I recommend buying two 36-inch rods, each of which is enough for two finished rods. Cut them with a hacksaw or a Dremel tool with a cutoff wheel. I suggest #10 size in the USA. Not sure which metric sizes are commonly available, but M5 would be a close match. 8 hex nuts that fit the threaded rods.
Statistics
Likes
3
Downloads
0