ESP32 HW-818 cam box snap lid 1/4-20 mount
Description
I couldn't find a box for the newer ESP32 CAM HW-818 which is complete and already has USB built in so I used svdasein's snap box as a base and modified it to fit this camera board. The board should snap in place but you can use a spot of hot glue to hold it tight. There are access holes for the lens and LED and USB. This board can get hot so I placed lots of ventilation holes. The back cover just snaps in place. I merged in a 1/4-20 nut from kijja so you can mount this to any standard tripod. There is also a version without the nut. I used Freecad and Prusa Slicer and printed using PETG on a Prusa Mini printer. Supports are not needed except for maybe just a small area under the nut as shown in the pictures. Freecad file is included in case you need to make modifications or improvements.
Statistics
Likes
8
Downloads
0