Wall mount and acces controller case for Xem Next RFID Access controller v2
Description
Wall mount case with invisible screw sockets, for pass trougth wall, and a good case for the xem RFID access controller v2 from dangerousthings: - https://dangerousthings.com/product/xac-v2/ Good fitting and easy screw-up any set-up. The coil box is only 1mm thin for a good lecture of your RFID implant.. The screws for the coil-mount are 5mm screw with hexagonal head. To fix the board on the box, you can use 2mm screws (I used recycled screws from scratch). To use the case box, you need to break away the tips of the PCB (as shown in images below). If you want to pass coil cable behind the PCB, you need to cut a little PCB part (see a example on images) Thank you for all, all tips are welcome.
Statistics
Likes
0
Downloads
0