SquadV2 Pigtail mount
Description
A top-mounted, pigtail mount for the SquadV2. **Hardware:** 2x M3 nuts 4x M3 screws 1x Pigtail with screw mount **Assembly:** Insert the nuts into the 2 slots one from each side. Insert the pigtail into the big slot. at the back. Screw in the pigtail with 2 M3 screws. Lastly, screw it into the top plate with the last 2 screws. **Notes:** The screwsI used was 4 screws I had leftover from the frame build. When printing use at least 3 layers and no less than 5% infill.
Statistics
Likes
0
Downloads
0