Set of buttons for Yamaha YIS-805 / YIS-503 or similar MSX computers
Description
This is the set of buttons for Yamaha YIS-805 and similar MSX2 computers. The functional key buttons as well as the BS button will fit the Yamaha YIS-503 and similar (CX7, CX5M2) computers. These are 2-component button models. The inner part should be printed using a different, more sturdy material. Normally, the outer part of a button should be printed on a DLP printer and the inner part - on the FDM printer with PLA. Then the 2 parts should be joined with instant glue. The outer part of the button has gaps for the letters. These gaps should be manually filled with the UV-hardened material of a different color. Use a syringe to fill the gaps up to the top of the button, make sure that there are no bubbles. Then remove the excess material if necessary and expose the button under a UV lamp for at least 5-10 minutes. If desired, the button could be gently polished with a fine nail polisher for the best look and feel. I've added a picture showing how the ready buttons should look like. If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page: https://www.thingiverse.com/Wierzbowsky/designs
Statistics
Likes
0
Downloads
0