Silver Surfer Vaporizer Model (Non-Functional)
Description
I needed some practice designing, so I modeled this semi-famous vaporizer model. It has six parts, the glass parts (2) should be printed in transparent filament for the best effect. A bit of warning, this was designed with precise tolerances, so you might want to print the glass parts a little big, and the heater stick a little small (say 102% and 98%). The knob pin probably needs to be slightly smaller, too. (Maybe 99%?) I included an STL of the whole thing assembled, and one STL that allows you to print the base and tube as one piece, instead of gluing them together. (All other parts slot in.) Haven't had a chance to print this yet (waiting on filament), but I've included a jaunty CGI rendered image of the vaporizer model.
Statistics
Likes
0
Downloads
0