Bebop 2 Jello Mod Fix Stabalisers
Description
This Mod was developed to improve video and picture quality resulting from prop vibration, Without needing to replace your imbalanced props. The system has been tested on both of my Bebop 2's which both suffered from "Jello Effect" I initially tried balancing the props, which improved the quality slightly but not sufficiently that the footage could be displayed on larger screens without noticing the waves of jello.. The results have been very successful removing 100% of the jello effect on the two drones fitted with the mod.. even improving the video quality in sports mode to better than I was able to achieve when the drone was new. The mod works by clamping the front and rear legs together with the use of the printed struts. this prevents the legs from vibrating which is the cause of the jello. The Mod is none invasive and clips in place over the the legs. Cable ties are used to make a more secure join. Test prints have been Produced & Tested in 0.2mm and 0.12mm Layer heights, both work. The Mod adds around 17grams to the weight of the drone.
Statistics
Likes
1
Downloads
0